Uline MONARCH 1130 Manual Del Usuario

π H-3539
MONARCH 1130
ONE LINE LABEL GUN
CHAnGInG tHE Ink rOllEr
1. Pull the latches back and swing the cover open
completely. You should hear a click.
NOTE: Do not force the cover past the click
position.
Figure 1
Figure 2
5. Close the cover completely.
PAGE 1 OF 6
1-800-295-5510
uline.com
2. Hold the labeler sideways
over a trash can while
pushing the button to
release the ink roller.
(See Figure 1)
3. Hold the new ink roller by
the stem. (See Figure 2)
4. Slide it onto the post,
snapping it into place.
(See Figure 2)
INSTRUCTIONS
SEttInG PrInt CHArACtErS
1. Pull the knob until the indicators are on the desired
band.
Figure 3
2. turn the knob until the desired character appears
black on a white background between the
indicators. to print a blank, select the blank space
for that band. (See Figure 3)
3. repeat steps 1-2 for each band.
4. Push in the knob when you are done.
lOAdInG lAbElS
1. Pull the latches back and
swing the cover open
completely. You should hear
a click. (See Figure 4)
NOTE: Do not force the
cover past the click
position.
2. For loading a new roll of labels, tear off and discard
the first 10 inches of label and liner.
3. to prevent jamming, peel the first 12 labels from liner
and discard.
Para Español, vea páginas 4-6.
2 12 95
Figure 4
0713 IH-3539