Celestron C6 Manual De Instrucciones

Dew Shield DX: C6-C8
INSTRUCTION MANUAL
Modelo #94018
This Dew Shield has been designed to bring maximum protection to your telescope's corrector lens during cold or humid
observation sessions. Moisture on your corrector lens can impair your optical image as well as attract dust and debris that will
further obstruct your viewing. The Dew Shield also serves as a lens shade preventing stray light from falling on the corrector
plate- greatly improving the contrast of your imaging. This Celestron Dew Shield is also designed with additional Velcro, so it rolls
up in a tight tube for easy transport.
INSTALLING/ATTACHING THE DEW SHIELD
1. Secure your telescope tube in the upright position in
your mount of choice
1
3. Hold the Dew Shield firm to the telescope tube with one
hand, and with the other, wrap the Dew Shield around
the telescope tube.
2. Remove the Dew Shield from it's clear plastic packaging,
and align the 4" wide notch with the dovetail rail on your
telescope tube, making sure that the padded edge is
contacting the telescope tube.
4. As the ends opposite the notch meet, the Velcro strips
should align. Press the strips firmly together to hold the
Dew Shield in place.
NOTE: The surface with the Celestron logo should be on top
and the logo readable.
5. Check to make sure the Dew Shield is secure and
straight on the telescope tube. Adjust as necessary.