Ecco REFLEX 5590 Serie Instrucciones De Instalación Y Funcionamiento

5590 Series - Reflex™ LED Minibars provide a compact yet
powerful warning solution that offers the flexibility of either
permanent, magnet mount or vacuum-magnet mounting.
The 5590 Series features 12-24 VDC operation, combines
both discrete optic and reflector technology to maximize light
output, and offers multiple flash patterns including double,
quad, quint, rotate and random.
!
WARNING!
Failure to install or use this product according to manufacturer's recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
Do not install and/or operate this safety product unless you have read and understand the safety information con-
tained in this manual.
1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices
are essential to ensure the safety of you and those you are trying to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high
current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output
performance of the system is maximized and the controls are placed within convenient reach of the operator so that
s/he can operate the system without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use,
the vehicle operator should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open
trunks or compartment doors), people, vehicles, or other obstructions.
6. The use of this or any other warning device does not ensure all drivers can or will observe or react to a warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an
intersection, driving against traffic, responding at a high rate of speed, walking on or around traffic lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying
all laws regarding warning signal devices. Therefore, the user should check all applicable city, state, and federal laws
and regulations. The manufacturer assumes no liability for any loss resulting from the use of this warning device.
Specifications:
Size: 5590XXX
5590XXX-VM
5590XXX-MG
Weight: Permanent mount
Vacuum-Magnet Mount
Magnet Mount
Input Voltage: 12 to 24 VDC systems
920-4300-00 Rev. D
Installation and Operation Instructions
5590 Series LED Minibars
15" x 9" x 2.5"
15" x 9" x 3.1"
15" x 9" x 2.5"
approx. 4.0 lbs.
approx. 6.3 lbs.
approx. 6.25 lbs.
Current Draw:
5590: 6.0 Amps Maximum
Maximum power consumption: 84 watts
Flash Rate:
See Flash Pattern Chart
Temp. Range: -30ºC to +50ºC
Page 1 of 5