List Of Codes - 2 - Silca Tri-Code Manual De Uso

Operating manual - English
5.5 L C
IST OF
Use the items "Original Code" or key MAKE-USE from the "List of Codes" menu to identify the SSNs
that have a code table associated.
When the SSN has been found, the key can be cut in the way described in Ch. 5.4 "Insert the Cuts - 1",
page 27.
Choose the function from the main menu by placing the cursor on "2- List of Codes".
Carry out the search by entering the code or Make (Ch. 5.1 "Symbols and terminology", page 20).
Example by Code: K001
• Press the key
• Enter the code "HA30055".
• The search finds only one series for HONDA with codes between K001 and N718.
The display will show:
Searches for the code entered is made in all the series relating to the MAKES enabled. With standard
settings the machine makes searches in all the series of codes. To filter searches for codes on the basis
of given Lock Makes or Cars, follow the instructions on page 57 (ch. 5.8 "Options - 5", 5.8.2
"Preferences", "Preselect Makes"). If the code entered belongs to a series but not to the group of makes
selected, the message "Code not found" appears and the last line of the window shows the words
"SHIFT + ?". Press the keys [SHIFT] and [?] to temporarily exclude the filter and extend the search to
all makes so that the result can be viewed without having to alter the settings for "Preselect Makes.
Press ENTER, the display will show:
• To view further information about the SSNs found, hold down the key
arrow].Example with cursor on: 1:K001-N718 Master
There are now two possible choices:
1) proceed with [SHIFT+ENTER] in order to follow the complete flow and see the cutting data
associated with the code entered. The cutting data is already entered and correspond to the code
K001.
2) Proceed with [ENTER] in order to skip some of the data and get to the window preceding start of the
cutting operation.
Press ENTER, the display will show:
Lower the safety shield and press START.
The display will show:
30
- 2
ODES
[right-hand arrow] to place the cursor next to the field "Code=".
?
C o d e = K 0 0 1
M F G =
= > H O N D A
[ 0 2 ] L i s t = E N T E R
C o d e = K 0 0 1
1 : K 0 0 1 - N 7 1 8 M a s t e r
2 : K 0 0 1 - N 7 1 8 V a l e t
S i l c a N r : 5 8 2
M a s t e r
1 - A C U R A
2 - H O N D A
C l a m p : A
C u t t e r : H 1 0 1
K e y o n s i d e A
P c s = 1 / 1
C U T T I N G I N P R O G R E S S
C o p y : 1 o f : 1
S i d e : A
A x i s : 1
Copyright Silca 2006
[ 0 2 ]
P o s . : 2
D i a l : 5
[ S T A R T ]
TRI-CODE H.S.
[right-hand
?