Maintenance; Battery - Pet Gluc Manual Del Propietário

MAINTENANCE

Battery

The meter comes with one 3V lithium battery (CR2032).
Low Battery Signal
The meter will display one of the messages below to alert you when the
meter power is getting low.
Replacing the Battery
To replace the battery, make sure that the meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old battery and replace with one 3V lithium battery
(CR2032).
3. Close the battery cover. If the battery is inserted correctly, you will hear
a few "beeps" afterwards.
NOTE:
• Replacing the battery does not affect the test results stored in the memory.
The " " appears with E-b, Error and low:
The power is not enough to do a test. Please change the
batteries immediately.
25