PET Gluc Manual Del Propietário página 13

If you do not want to set an alarm, press SET to skip this step.
If you want to turn off an alarm, find the alarm number by pressing SET in
the setting mode, press M button to change from "ON' to "OFF".
At the time of your alarm, the meter will beep and automatically turn on.
You can press M button to silence the alarm and insert a test strip to begin
testing. If you do not press M button, the meter will beep for 2 minutes
then switch off. If you do not want to test at this time, press M button to
switch off the meter.
Congratulations! You have completed all settings!
NOTE:
• These parameters can ONLY be changed in the setting mode.
• If the meter is idle for 3 minutes during the setting mode, it will switch off
automatically.
13