Firmware Upgrade; Firmware Upgrade Procedure - LD Systems LDZONEX1208 Manual De Usuario

FIRMWARE UPGRADE

Please note that the use of an old software version with new firmware or the use of new software with old firmware works in principle but the
range of functions may be limited or the functionality may not be optimal in all cases.
We recommend always using the latest versions of software and firmware.
Before you start, check the software and firmware versions.
To check the device's firmware version, ensure that your device is switched on and online. The network view marks devices available for a firmware
upgrade with a yellow triangle using an exclamation mark. In addition, the device's firmware version is also listed in the device block for the
respective device.
The current software version is displayed when you click on About in the menu in the top bar.

FIRMWARE UPGRADE PROCEDURE

Save the device's design file on your computer as all programmed data will be deleted from the device during the upgrade. When the firmware
upgrade is complete, the design file can be reloaded on the device.
• The device must be online and ready for operation to perform a firmware upgrade.
• The newest firmware version for the corresponding Zone X model can be downloaded from the LD Systems website (www.ld-systems.com).
• Right-click in network view on a device block and select "Firmware Upgrade".
11