Disposal Instructions; Where Do I Start; Installing - Whirlpool WRM42D2 Manual De Usuario

Disposal Instructions

•
This product uses insulating gas and refrigerant gas that do not harm the ozone layer.
They have reduced greenhouse potential. These gases are flammable.
•
Insulation material gases require a special disposal procedure.
Contact local authorities to safely dispose of this product.
•
Scrap the packing material to prevent potentially negative consequences for the
environment and the health of persons.

Where do I Start?

INSTALLING

Excessive Weight Hazard
Use two or more people to move
and install the refrigerator.
Failure to do so can result in back
or other injury.
Before turning on:
•
Remove base from packaging.
Remove wedges and tapes from the
internal components.
•
Clean your product inside with a soft
cloth or sponge, lukewarm water and
mild soap.
•
Do not use sharp objects or any other
item in an attempt to speed up the
defreezing process. Do not use sharp
objects, alcohol, flammable products or
abrasive cleaners.
They can damage the painting of your
refrigerator and/or refrigerant circuit.
•
Do not damage the cooling circuit.
•
Do not place nor use electrical
apparatuses within the product.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground wire.
Do not use an adapter (
Do not use an extension cord.
2 prong outlet.
- Do not remove the ground wire.
- Connect the ground wire to an
effective ground.
Failure to follow these
instructions can result in death,
fire or electrical shock.
*
( ) Except by adaptors certified by the
manufacturer of this appliance and
provided by authorized dealer.
3
* ).