Leckey KIT Seating System Instrucciones De Usuario página 13

7.7 Contoured sacral
support
To fit the contoured sacral support cushion,
loosen the laterals using the screw (A) on the
hinge. Insert laterals into pockets and fasten
poppers on back.
Slide the support onto the lowest mounting
bracket on the backrest spine. Secure it with
a bolt (B) on either side. Cover the bracket
with a spine upholstery shroud (C).
C
A
B
7.8 Thoracic Support
Fit the cushion over the hardware and fasten
at the back with the poppers.
Slide the support onto the middle mounting
bracket on the backrest spine. Secure it with
a bolt (A) on either side. Cover the bracket
with a spine upholstery shroud (B).
A
B