Browse Captured Photos Or Recorded Videos - Depstech Wf020X Guia Del Usuario

OPERATION
Instruction: The client-side can support Android/IOS/windows systems.
Version requirement: Support Android 2.3 and higher, IOS 6.0 and higher( Note:
IOS 8.0 lower system can not record videos), windows 7/8/10.
Factory Default WiFi SSID: Jetion _*********
Factory Default Password: 12345678
How to use on Android?
Detailed Operation Steps:
© Search the free "DEPSTECH'APP in Apple [AAA
Store or"Depstech-WiFi"App in Google Play games
Store, and download and install it. is PS
@) Turn on the endoscope WiFi box power switch firstly, the red power LED and the
blue WiFi Signal LED will light up.
(3) Turn on your smart phone, then click the "Settings" icon on the main menu of
smart mobile phone; choose WiFi/Wlan to select and connect the default WiFi from
the endoscope," Jetion_********" by entering default password "12345678" and
finally click join.
When connected well, the blue wifi signal LED will flick. If not, it means it failed in
connection, please reconnect or check the power of the WiFi box before
reconnecting. please charge wifi box through DC5V 2A portable battery or
computer USB, or the box battery will be burned.
Settings
Wi-Fi Enter the password for "Jetion 43305008"
Cancel Enter Password Join
Airplane Mode + Jetion_ A i
@ After joining the endoscope WiFi, please click the free"Depstech'/"Depstech-Wi-
Fi" app on your smart devices and then you are ready to operate the camera.
How to use "DEPSTECH" app:
1. Modify WiFi SSID and WiFi password.
Click the" Settings" icon ie i
WiFi SSID and password
&" Set WiFi Password" E to finish the modification.
SS a
Note 1: if not necessary, we do not advise our customers to change the original
WiFi SSID and WiFi password for stabler using experience. If you forgot the modified
password, pls use a clip to press the reset hole and restart the endoscope and
re-join its WiFi. Only the password can be reset, pls find the modified WiFi SSID to
join with default password after reset.
Note 2: The new WiFi password must be within 8 characters either numbers or
letters without any special marks like asterisk "*"or dash "~"
Note 3: The device needs to be restarted after the modification.
2. Capture photos or Record videos
- For capturing photos, click IBN icon on the main interface of the app. For recording
videos, click EE icon on the main interface of the app. For adjusting scope
direction/range, click icon on the main interface of the app.
3.Browse captured photos or recorded videos
when you enable the app accessible to the "Photo" in your phone settings.
4. Modify Camera Resolution
Click the" Settings" icon fq on the main interface, and then choo
via clicking ! con; confirm the adjustment with touching
2