EN
SECURITY FIRST
Always keep on your mind the
following safety and security
standards in order to prevent electric
chock or another personal accident.
It is very important to read
the manual to understand the
application, limitations and potential
problems associated with this tool.
GENERAL'S INSTRUCTION
SAFETY.
Read the instructions.
CAUTION:
Any fault in the safety procedures
can result in electrical shock, fire
and / or serious injury.
The term "electrical machine"
used in all of the warnings listed
below refers to your main source
of operation (wired) or battery
operation (cordless).
SAVE THIS MANUAL.
WORKING AREA
Keep the work area clean and tidy.
Messy and dark areas can facilitate
accidents.
Do not operate electrical equipment
in explosive atmospheres, such as
the presence of flammable liquids,
gases or dust.
Electrical machines loose sparks
which may ignite the dust or fumes.
Keep children or any other persons
away while operating with this machine.
Distractions can cause loss of control.
ELECTRICAL PRECAUTIONS
The plugs of electrical machines
must match its output.
Never modify the plug in any
circumstances. Do not use any plug
adapter for electrical machines with
earth connection. Unmodified plugs
and correct biases reduce the risk
of electric shock.
Avoid body contact with grounded
surfaces such as pipes, radiators,
sticks and refrigerators.
Do not expose to rain or moisture
electrical machines. The water intakes
increase the risk of electric shock.
Never carry the power tool by the
power cable. Keep it away from
heat, oil, sharp edges and moving
parts. Damaged or pinched wire
increases the risk of electric shock.
When working with the machine
outdoors, use an extension cord
suitable for outdoor use. The use of
proper wire for exterior reduces the
risk of electric shock.
PERSONAL SAFETY
Stay alert and take proper attention to
the work you are performing. Never
use an electric machine feeling tired
or while under the influence of drugs,
alcohol or medication.
A moment of inattention while
operating the machine can result in
serious injury.
Use safety equipment.
Always use eye protection.
Safety equipment such as dust
mask, non-slip shoes, protective
helmet, or hearing protection used
for appropriate conditions will
reduce the risk of personal injury.
Avoid accidents when starting the
machine. Make sure the button is in
the "Off" position before connecting
the machine to the main power.
Transporting the machine with the
finger on the button or link it to the
main power with the button in the
"On" position is an increased risk in
terms of accidents.
Remove any adjusting key or wrench
before turning the machine on. Any
tool left in a rotating part of the
machine can result in serious injury.
Do not exceed the machine's
capabilities. Keep a solid foundation
and a perfect balance at all times.
You will have a better control of the
machine in unexpected situations.
Dress appropriately. Do not wear
loose clothing or jewelry. Keep your
hair, clothing and gloves away from
rotating parts.
Loose clothes, jewelery or long hair
can be caught in moving parts.
If the accessories for powder
collecting and small particles are
provided, ensure their proper
placement and its intended use. The
use of these accessories can reduce
the problems associated with dust.
USE AND TREATMENT OF
ELECTRICAL MACHINES
Do not force the machine. Use the
machine correctly for it's purpose.
The specific use of a machine will
make your work better and safer.
Do not use a machine if it's "On /
Off" button does not work properly.
Any machine that cannot be
controlled with the button is
considered dangerous and therefore
should be repaired.
Disconnect the main plug before
making any adjustments, changing
accessories, or storing the machine.
Such preventive safety measure
will reduce the risk of accidentally
turning the machine on.
Store loose parts of your machine
away from children and do not allow
anyone handle it, even being in
possession of it and these instructions.
Electrical machines are dangerous if
used by inexperienced people.
15