Creative PEBBLE V3 Quick Start Guide página 3

2. Setting Up Creative Pebble V3
USB
USB-C to A
Converter
(if required)
i) USB Audio mode
3. Master Reset
8s
4. Technical Specification
• Speaker Power: 2 x 4W RMS
• Total System Power: Up to 8W RMS, Peak Power 16W
• Drivers: 2.25" Full-range Drivers with Built-in Passive Radiators
• Wireless Technology: Bluetooth 5.0
• Bluetooth Profiles: A2DP (Wireless stereo Bluetooth)
• Wireless Type: Bluetooth Classic
• Operating RF Range: 2402–2480 MHz
• Max. RF Output Power: < 4 dBm
• Input: 5V 2A
• Signal-to-Noise Ratio: 75 dB
• Frequency Response: 100–17,000 Hz
• Connectivity: USB Audio, Bluetooth, 3.5 mm Analog Stereo-in
• Operating Temperature: 0–45°C
5. Other Information
Please visit creative.com/compliance/pebblev3 for the user guide, safety and regulatory information.
Please visit creative.com/support/pebblev3 for all other support related to your product.
Note: Compliance markings are located at the bottom of the product
ii) Bluetooth mode
Flashing Blue / Green
Pebble
V3
Once Master Reset is complete, previously paired Bluetooth
devices will be removed. Creative Pebble V3 will then return to
its original default state.
Note: Up to 8W RMS when Gain is set to "High" while plugged
into a 10W USB-C Port / USB-C Power Adapter / 5V
Power Adapter
*
Adapter not included
*
iii) AUX-in mode
*
AUX-in cable
*
not included
2A USB-A