xarvio CONNECT Manual De Instrucciones página 7

Good to know
Avoid fully surrounding the device by metal.
It can block or reduce the transfer speed.
Stand by mode lasts up to 1 month.
Turn off the device if you do not plan to use
it for a longer period.
It can take 5–10 minutes for transfer mode
to turn on if the battery was fully
discharged.
Mode indicator light is off:
✓
Make sure the device is turned on.
✓
Press the mode switch button (A)
to wake the device.
✓
Check the cable connection.
Maps are not in xarvio FIELD MANAGER:
Use the mode switch button (A) to switch
to transfer mode until the light is red.
The transfer might take a few minutes.