Assembly Instructions - Allen + Roth Wslpws Instrucciones De Ensamblaje

ASSEMBLY INSTRUCTIONS

1. Attach the shelf (A) to assembly, using elbow (B)
and straight joint (C) .
2. Attach the base (D) and elbow (B) to assembly.
Note: Base should be firmly tighten.
Option #1
3. For wooden stud wall installations, using a stud
finder (not included), find 2 stud locations in the wall
and mark them with a pencil (not included). Draw a
level line at the desired installation height for shelf (A).
1
A
A
B
C
2
D
B
3
Level Line
Stud Locations
4
ASSEMBLY INSTRUCTIONS
4. Secure base (D) to the wall at marked stud
locations with M4 x 50 mm wood screws (AA).
B
Hardware Used
M4 x 50 mm
AA
Wood Screw
Option #2
5. For drywall installations, drill a 3/16 in. pilot hole and
then marked location.
6. Insert drywall anchor (BB) until flush in the hole.
secure base (D) to the wall over the anchor with
M4 x 50 mm wood screws (AA).
Hardware Used
M4 x 50 mm
AA
Wood Screw
BB Drywall Anchor
4
D
x 16
5
Stud Locations
6
D
x 16
x 16
5
AA
BB
AA