Seat Functions And Operation; Height Adjustment; Lumbar Support; Lateral Support Adjustment - Grammer HIGH PERFORMANCE LINEA & TOUREA Instrucciones De Manejo

(Description of operation on the right. Operation on the left: laterally reversed.)
2
1
2 1
* if fitted ** depending on model

Seat functions and operation

Height adjustment

The height can be adjusted in 8 steps.
Pull or push the handle for height adjustment to
move the seat upwards or downwards by one
step.

Before adjusting the height upwards or
downwards again to the next step, the handle
must be released.
997

Lumbar support

With the front (1) and back (2) switch the
curvature in the upper and lower area of the
backrest upholstery can be adjusted
individually.
The air compartments will be filled by setting
the respective switch to „+" and emptied by
setting it to "-".
998

Lateral support adjustment

By actuating the switch, the curvature of the
lateral guide right and left of the backrest can
be adjusted individually by means of
compressed air.
By setting the switch to "+", the air
compartments will be filled. By setting it to "-",
they will be emptied.
999

Backrest adjustment

Pull up the locking lever to release the
backrest catch. When releasing the backrest
catch, do not apply load to the backrest by
pressing against it. By exerting pressure on or
off the front or rear part of the seat pan it can
be moved to the desired position. Release the
locking lever to lock the backrest.
It should not be possible to move the

1000
backrest into another position after it has
been locked.
When the backrest is folded forward,
fluted metal locking devices on either side –
left and/or right – protrude from the bottom of
the backrest and, during the adjustment
procedure, can cause shearing and crushing
of the body of the person performing this task.
– DO NOT REACH INTO THIS DANGER
ZONE –
21