Matco Tools MCL162P Instrucciones De Operación

LIJADORA/PULIDORA DE PREPARACIÓN DE SUPERFICIE 16V
PONCEUSE-POLISSEUSE À PRÉPARATION DE SURFACE DE 16V
16V
Operating Instructions • Warning Information • Parts Breakdown
Battery Type . . . . . . . . . . . . . . . . . . . . . . . . 16V Lithium Ion
Low Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-2,100 RPM
High Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-7,000 RPM
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 .9"
WARNING
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
MCL162P
SURFACE PREP
SANDER / POLISHER
S P E C I F I C A T I O N S
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Weight with Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 2 .0 lbs
Spindle Thread...... . . . . . . . . . . . . . . . . . . . . . . . 5/16"-24
Compatible Battery . . . . . . . . . . . . . . . . . . . . . .MCL1620LB
Compatible Charger . . . . . . . . . . . . . . . . . . . . . MCL16CHRG
Charging Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . <60 min .
WARNING
Copyright © Professional Tool Products, 2017
MCL162P
MCL162P
All rights reserved.
rev 11/30/17