Safety Information; Preparation; Assembly Instructions - Allen + Roth 67914W-103402 Instrucciones De Montaje

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate, or install the
product.
WARNING
• Follow the installation instructions carefully. Proper installation is the installer's responsibility.
• Failure to follow correct installation procedures can result in the faucet being loose, which can
result in serious injury.
CAUTION
• Check local building codes before you begin installation to ensure compliance.

PREPARATION

Before beginning the assembly of this product, make sure all parts are present. Compare parts with
the package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes (including removal of old faucet)
Tools Required for Assembly (not included): Adjustable Wrench
Helpful Tools (not included): Safety Goggles

ASSEMBLY INSTRUCTIONS

1a. Optional No Deckplate Installation:
Shut off the water supply. Remove the old faucet.
Clean the mounting surface. Check for the proper
thickness of the sink or countertop. Insert the top
mount install (B) into the sink or countertop. Do not
over tighten. If your model does have a deckplate,
skip to step 1b.
Note: "Front" on the top mount install (B) must face
the front of the sink or countertop. The two mounting
plates (a) on the top mount install (B) must be loose
movable during the installation of the top mount
install (B).
1a
4
B
a