Allen + Roth TPPER9137 Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
2
Hardware Used
AA
FF
HH
AA
FF
C1
C1
2.1. Insert the connectors (E1) to the beams (C1), secure with bolts (AA) and plastic washers (FF),
tighten with wrench (JJ). Place cap (HH) on the bolt heads.
2.2. Attach the ferrule (F1) to the beam assemblies (C1/E1).
2.3. Attach the beams (C2) to the beam assemblies (C1/E1/F1) and secure with bolts (AA) and
plastic washers (FF), tighten with wrench (JJ). Place cap (HH) on the bolt heads.
C1
E1
HH
AA
FF
C2
F1
HH
JJ
C2
F1
C1
HH
AA
FF
F1
C1
7
E1
C2