Toro Flex-Force Power System 60 V MAX Manual De Instrucciones página 14

Operation
Starting the Trimmer
1. Make sure that the vents on the trimmer are
clear of any dust and debris.
1. Trimmer venting areas
2. Align the cavity in the battery pack with the
tongue on the handle housing
3. Push the battery pack into the handle until the
battery locks into the latch
1. Battery latch
4. To start the trimmer, squeeze the lockout trigger,
then squeeze the variable-speed trigger
9).
Note:
Slide the speed range switch to change
the speed of the trimmer.
Figure 7
(Figure 8).
(Figure 8).
Figure 8
1. Speed range switch
2. Lockout trigger
Shutting Off the Trimmer
To shut off the trimmer, release both triggers.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
Removing the Battery Pack
from the Trimmer
Press the battery latch to release the battery pack and
g293133
slide the battery pack out of the machine
1. Battery latch
g268418
(Figure
12
Figure 9
3. Variable-speed trigger
(Figure
Figure 10
g268420
10).
g268419