Tabla De Contenido - Cramer SNB408 Manual Del Usuario

1 Description...................................4
1.1 Purpose...................................................... 4
1.2 Overview.................................................... 4
2 Safety............................................4
3 Installation................................... 4
3.1 Unpack the machine...................................4
3.2 Install the upper handle.............................. 4
3.3 Install the discharge chute..........................5
3.4 Install the chute control rod........................ 5
3.5 Install the battery pack............................... 5
3.6 Remove the battery pack........................... 5
4 Operation..................................... 5
4.1 Cold weather operation.............................. 5
4.2 Use of control panel................................... 5
4.3 Start and stop the auger/impeller............... 6
4.4 Adjust the auger speed.............................. 6
4.5 Self-propelled drive mode.......................... 6
4.6 Start auger and self-propelled drive
simultaneously ...........................................7
English
4.7 Lock self-propelled drive paddle and
auger engagement paddle with one
hand........................................................... 7
4.8 Manually move the machine.......................7
4.9 LED headlights........................................... 7
4.10 Adjust the discharge chute......................... 7
4.11 Adjust the chute deflector...........................7
4.12 Operation tips............................................. 8
5 Maintenance.................................8
5.1 General maintenance................................. 8
5.2 Clear the clogged chute............................. 8
5.3 Replace the skid shoes.............................. 8
5.4 Replace the scraper plate.......................... 8
5.5 Replace the safety pin................................9
5.6 Replace the drift cutter............................... 9
5.7 Store the machine...................................... 9
6 Troubleshooting.......................... 9
7 Technical data............................10
8 EC Declaration of conformity... 10
3
EN