Communication Interface - Sick Wtm12L Multimode Serie Instrucciones De Uso

Features
Sensing range
Min. sensing range
Sensing range max.
Recommended sensing range for the best
performance
1) Object with 90% remission factor (complies with standard white according to DIN 5033)
2) Depends on the selected MultiMode mode
Emitted beam
Light sender
Type of light
Light spot size / distance
1) To ensure reliable operation, it is recommended to use fine triple reflectors or reflective tape. Suitable reflectors and tapes
can be found in the SICK accessories range. Use of reflectors with large-scale triple structures can negatively influence
functionality.
key laser figures
Laser class
maximum pulse power
Pulse duration
Wavelength
1) To ensure reliable operation, it is recommended to use fine triple reflectors or reflective tape. Suitable reflectors and tapes
can be found in the SICK accessories range. Use of reflectors with large-scale triple structures can negatively influence
functionality.

Communication interface

Table 12: Communication interface
IO-Link
IO-Link
Data transmission rate
8027716.1HYU/2023/04/25 | SICK
Subject to change without notice
WTM12L-xxxxx8xxxxx
MultiMode 1/3/4/5/6: 15 mm
MultiMode 2: 20 mm
MultiMode 1/3/4/5: 420 mm
1)
MultiMode 2: 150 mm
1)
MultiMode 6: 650 mm 1)
MultiMode 1/3/4/5: 40 ...
160 mm
2)
MultiMode 2: 40 ... 120 mm 2)
MultiMode 6: 40 ... 400 mm
2)
2.4 x 1 mm@160 mm (xxxx8xxxx)
2.2 x 1.2 mm @300 mm (xxxx1xxxx)
WTM12L-xxxxx8xxxxx: 4.03 mW, 2.5 kHz
WTM12L-xxxxx1xxxxx: 6.74 mW, 1.0 kHz
O P E R A T I N G I N S T R U C T I O N S | WTM12L MultiMode
OPERATING INSTRUCTIONS
WTM12L-xxxxx1xxxxx
MultiMode 1/3/4/5/6: 50 mm
MultiMode 2: 80 mm
MultiMode 1/3/4/5: 850 mm
MultiMode 2: 350 mm
MultiMode 6: 1,200 mm
MultiMode 1/3/4/5: 100 ...
300 mm
MultiMode 2: 100 ... 200 mm
MultiMode 6: 100 ... 700 mm
WTM12L
Laser
Visible red light
WTM12L
1 1)
4 x 1 µs
655 nm
WTM12L
1.1
COM2
en
65