Unit Installation; Main Parts (Descriptions); Removing The Panels; Removing The Upper Front Panel - Hisense Hi-Therma Serie Manual De Instrucciones

Unit Installation

7. Unit Installation

7.1 MAIN PARTS (DESCRIPTIONS)

No. Part
1 Upper front panel
1
2 Lower front panel
3 Side panel
4
4 Master controller
5 Piping connections
6 Hole for wiring
2
Window for charge
7 port of expansion
vessel
Window for
8
air purge valve
7.2 UNIT INSTALLATION
• Adjust the installation to compensate for floor
irregularities. The maximum allowed deviation is 1°.
6 5
8
3
≤1°
● To prevent the indoor unit from tipping, it is
recommended to fix the unit on the ground by four
L-shaped feet with 8 anchor bolts (M6).

7.3 REMOVING THE PANELS

If it is necessary to access to the indoor unit components,
please follow these operations.

7.3.1 Removing the upper front panel

The indoor unit front panel needs to be removed for any task
inside the indoor unit.
1. Unscrew 1 screw on the top of unit.
Unscrew the 1 screw.
8
Indoor unit
L-shaped feet
(4 parts)
Anchor bolts
(8)
loor
Unit: mm
∅7×8