Variable Speed Trigger Switch; Switching On And Off - Practyl Sid500 Manual De Instrucciones

FR
4
ES
PT
IT
EL
PL
UA
+
-
RO
EN

VARIABLE SPEED TRIGGER SWITCH

This tool has a variable speed switch that delivers higher speed and torque with increased trigger
pressure. Speed is controlled by the amount of switch trigger depression.
The variable speed feature enables you to select the best speed for a particular application.
To limit the maximum speed of the tool, rotate the dial on the front of the trigger until the desired
setting is achieved.
Turn the dial to the "+" direction to increase the speed and to the "-" direction to decrease the
speed.
(see photo 4)
186
5
ON/OFF

SWITCHING ON AND OFF

(see photo 5)
Start the tool by squeezing the on/off trigger switch.
Release the trigger to stop the tool.
If you press the lock on button while the trigger switch is depressed, the switch is kept in the oper-
ating position.
This is convenient when continuous operating for extended periods of time is required.
To release the lock on button, press and release the trigger switch.
187
FR
ES
PT
IT
EL
PL
UA
RO
EN