Installing The Top Cover; Removing The Psu - Broadcom FWA-ASM2012 Guía De Usuario

3.2 Installing the Top Cover

1. Press the top cover and make sure the four corners are engaged with the chassis.
2. Make sure the guide pin and the guide pin hole are well aligned.
3. Grab the latch handle and slide the top cover forwards.
4. Lock the latch with a screwdriver.

3.3 Removing the PSU

Remove the power cord from PSU
1.
2. Grab the PSU handle and unlock the module by pulling the PSU lock to the left.
3. Hold the lock and extract the PSU module.
Drawings and specifications herein are property of the Company and shall not be reproduced or copied or used without prior written permission.
21 25
Page of