Front Runner TRBU001 Instrucciones De Montaje

READ ME FIRST:
Thank you for purchasing a Front Runner Slimline II Load Bed Rack or Load Bar Kit.
Your Kit will contain the following items:
1.) A Slimline II Tray or Load Bar Set
2.) Universal Load Bed Tracks
3.) Universal Load Bed Legs
The different sections in this document will help you fit the various items received in your kit.
Section 1: Fitment of Load Bed Tracks to your vehicle.
Section 2: Fitment of Universal Load Bay Legs & Slimline II Tray.
Section 3: Fitment of Universal Load Bay Legs & Load Bars.
INSTALL LOAD BED TRACKS
( )
Here is what you are looking at for TBRU001. Please note that only one side's components are shown
A
below. Familiarize yourself with the parts and then step away from the work area and read through these
instructions from beginning to end. Take a moment as a little prep now may save you a lot of time later.
Item # Quantity
1 4
2 12
3 4
4 2
5 2
6 6
7 12
8 12
TRBU001 / KRLBUNI1_REV_A01
Description
M3 x 6 SELF TAPPING SCREW
M6 x 25 COUNTERSUNK BOLT
END CAP
LOAD BED TRACK
RUBBER TRACK LINER
CLAMP PLATE
M6 FLAT WASHER
M6 NYLOC NUT
Universal LOAD BED
TRAY & Load BArs
You will need:
4 mm Hex key
10 mm Wrench
4 & 7 mm Drill bit
Drill machine
1
TRBU001 / KRLBUNI1
INSTALL TIME: 2.5 Hours
Marking pen
Measuring tape
Small Phillips Screwdriver
Friend