Installation Of The Setting-Up Kit; Assembly Of The Disc Aerators (16-44 Pe); Assembly Of The Pipe Aerators (50-90 Pe) - Graf oneAdvanced Manual De Instalación

4 Final assembly and installation of oneAdvanced 16–90 PE
4.3

Installation of the setting-up kit

4.3.1 Assembly of the disc aerators (16–44 PE)
The stainless steel pipes for ventilation
are to be assembled in the tank accord-
ing to their installation size in line with the
drawings below.
All connections are to be sealed using
Teflon tape. Finally, the concrete weight
supplied is to be placed on to the down-
pipe.
300
Assembly of the 2nd disc aerator
4.3.2 Assembly of the pipe aerators (50–90 PE)
The stainless steel feet are bolted to the stainless steel air distributor.
The diaphragm pipe aerators and the downpipe are installed later in the tank.
Downpipe
300
26 / 144
Seal all threads
with Teflon tape!
Assembly of the disc aerators (1st disc aerator)
500
Assembly of the 3rd disc aerator
Disc aerator
Tighten the plastic
thread hand-tight
500