Safety Instructions - TECshow GOBO DERBY UV Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. SAFETY INSTRUCTIONS

Once after received this product , please take
and put carefully. And check cautiously that
whether the product was damaged or not dur-
ing the transportation, if yes, please not use
this fixture and contact local dealers or manu-
facturers as soon as possible.
The applicable temperature for the lighting is
below 40°C. Do not use the lighting above the
temperature.ta=40.
The fixture applicable widely, it must keep-
ing clean, Please do not in overheat or dusty
environment use the device. Do not touching
Chemical liquid.
Should be paid attention to the use of this
product: fire, heat, electric shock, loss caused
by severe or fatal injury, in electricity or to
read the instructions before installation,
follow the safety instruction and pay atten-
tion to the manual and warning signs on the
equipment, if you have any other questions
about how safe operating equipment, please
4. INSTALLATION
When install this equipment please make sure
there's no flammable surfaces (decorated
things, etc) and minimum distance of 0.5M
from the equipment to the flammable.
The installation of the effect has to be built
and constructed in a way that it can hold 10
times the weight and without any harming
deformation.
contact the dealer or manufacturer as soon as
possible.
According to the procedures described in this
operating instructions, please do not open by
yourself. Any break, please contact profession-
als, and must by the professional and techni-
cal personnel for repair.
Do not power in and open before installation.
Let have a rest when continuous work for eight
hours. It will longer the device using lift.
Fixed installation, to prevent the strong vibra-
tion or impact of the device.
he distance between the device and the pro-
jectile to keep at least 0.5 meter.
Never look directly into the light source,as
sensitive persons may suffer an epileptic
shock (especially meant for epileptics) !
When light output position of the device of
dustproof glass breakage, cracks or other visi-
ble damage, user should replace the new glass
to continue to use.
The installation must always be secured with
a secondary safety attachment, e.g. an ap-
propriate safety rope. Never stand directly
below the device when mounting, removing or
servicing the fixture.
English version
| Tecshow Gobo Dervy UV
P. 5

Publicidad

Tabla de contenido
loading

Tabla de contenido