Tabla de contenido
Publicidad
9. Certificados
9.4. Declaración de incorporación de la UE
EU Declaration of Incorporation
Manufacturer:
Universal Robots A/S
Energivej 25
DK-5260 Odense S Denmark
Description and Identification of the Partially-Completed Machine(s):
Product and
Function:
Model:
Serial Number:
Incorporation:
It is declared that the above products, for what is supplied, fulfil the following directives as detailed below:
When this incomplete machine is integrated and becomes a complete machine, the integrator is responsible for determining that
completed machine fulfils all applicable Directives and update the harmonized and other standards.
I. Machinery Directive
2006/42/EC
II. Low-voltage Directive 2014/35/EU
III. EMC Directive 2014/30/EU
IV. RoHS Directive 2011/65/EU
V. WEEE Directive 2012/19/EU
Reference the Harmonized Standards Used, as Referred to in Article 7(2) of the MD & LV Directives and
Article 6 of the EMC Directive:
(I) EN ISO 13732-1:2008,
Reference to Other Technical Standards and Specifications Used:
(I)
ISO 9409-1:2004
The manufacturer, or his authorised representative, shall transmit relevant information about the partly completed
machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body Bureau Veritas, certificate #DK008850.
Odense Denmark, 1 September 2019
Name:
Universal Robots A/S, Energivej 25, DK-5260 Odense S, Denmark
CVR-nr. 29 13 80 60
Guía de instalación
(in accordance with ISO/IEC 17050-1:2010)
Person in the Community Authorized to Compile the Technical File:
David Brandt
Technology Officer, R&D
Universal Robots A/S, Energivej 25, DK-5260 Odense S
Industrial robot (multi-axis manipulator with AC or DC powered OEM controller)
Function is determined by the completed machine (with end-effector and intended use).
e-Series robots with either AC or DC OEM controllers:
UR3e OEM AC, UR5e OEM AC, UR10e OEM AC, UR16e OEM AC
UR3e OEM DC, UR5e OEM DC, UR10e OEM DC, UR16e OEM DC
Starting
2019
5
0
00000 and higher
year
Sequential numbering, restarting at 0 each year
e-Series
3 = UR3e, 5 = UR5e, 0 = UR10e
Universal Robots e-Series OEM robots (UR3e, UR5e, UR10e and UR16e) shall only be put
into service upon being integrated into a final complete machine (robot system, cell or
application), which conforms with the provisions of the Machinery Directive and other
applicable Directives.
The following essential requirements have been fulfilled:
1.1.2, 1.1.3, 1.1.5, 1.2.6, 1.3.4, 1.3.8.1, 1.5.2, 1.5.10, 1.7.2, 1.7.4, 4.1.2.3
It is declared that the relevant technical documentation has been compiled
in accordance with Part B of Annex VII of the Machinery Directive.
Reference the Low-voltage Directive.
Reference the EMC Directive.
Reference the RoHS Directive 2011/65/EU.
Reference the WEEE Directive 2012/19/EU
(II) EN 60204-1:2006/ A1:2010,
as applicable
(II) EN 60320-1:2001/ A1:2007
(II) EN 60664-1:2007
(II) IEC 60664-5:2007
Effective 1 September 2019
(II) EN 61140:2002/ A1:2006
as applicable
(II) IEC 61784-3:2010
ISO 14664-1:2015
UR5e and UR10e manipulators (not
controllers)]
Roberta Nelson Shea
Phone +45 8993 8989
Fax +45 3879 8989
23
Original EN
[SIL2]
[Class 5 for UR3e,
info@universal-robots.com
www.universal-robots.com
OEM Control Box
Publicidad
Tabla de contenido
