Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

S-9600-PLR, S-9600TS-PLR, S-9601-PLR, S-9602-PLR
Operation & Maintenance Manual
Model Numbers
S-9600-PLR
Origins Shower Valve
S-9600TS-PLR
Origins Tub/Shower Valve
S-9601-PLR
Origins Shower System
S-9602-PLR
Origins Tub/Shower System
Modifications
-1.5
1.5 gpm (5.7 L/min) flow restrictor
-2.0
2.0 gpm (7.6 L/min) flow restrictor
-231
Super showerhead in place of Clear-Flo
-295
Institutional showerhead in place of
Clear-Flo
-SS
Slip spout on any tub/shower unit
-X
Integral service stops
-CHKS
Integral check stops
-IPS
1/2" female IPS connections
-REV
Reverse coring for back to back
installations
-LP
Loop handle
-B
Chrome brass escutcheon
-D
Chrome brass dome cover
-VP
Vandal proof escutcheon screws
-OP
13" oval plate
-L/HD
Less showerhead
-TRM
Trim only, valve not included
-STN
Satin Nickel finish
Note: Append appropriate -suffix to model number.
Origins
Specification
S-9600-PLR/S-9601-PLR
Shower system powered by the Temptrol
Balancing valve. Features adjustable stop screw to
limit handle turn, integrated volume control, 1 mode
showerhead with easy to clean rubber nozzles and
standard 2.5 gpm (9.5 L/min) flow restrictor. Components
made from metal and nonmetallic materials plated in
standard polished chrome finish.
S-9600TS-PLR/S-9602-PLR
Tub/shower system powered by the Temptrol
Balancing valve. Features adjustable stop screw to limit
handle turn, integrated diverter, non-diverter tub spout,
1 mode showerhead with easy to clean rubber nozzles
and standard 2.5 gpm (9.5 L/min) flow restrictor.
Components made from metal and nonmetallic materials
plated in standard polished chrome finish.
Compliance
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
For California Residents
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm.
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
2.0 gpm (7.6 L/min)
Pressure
®
Pressure
®
Certi ed by
CSA Group
Tabla de contenido

Solución de problemas

loading

Resumen de contenidos para Symmons Origins S-9600-PLR

  • Página 6: Especificación

    Tornillos para chapetón a prueba de  5 años: para instalaciones industriales y comerciales. vandalismo Visite www.symmons.com/warranty para obtener la Placa ovalada de 13”  información completa sobre la garantía. -L/HD Menos cabezal de ducha ...
  • Página 7: Dimensiones

    Dimensiones Medidas 6 3/8”, 162 mm 3 1/2”, 89 mm 3 5/8”, 92 mm Tamaño de los orificios de la vávula para ducha Mín. Ø 3”, 76 mm Máx. Ø 4”, 102 mm Ref. 77”, 1956 mm Empotrado 2 3/8” ± 1/2”, 60 mm ± 13 mm Ref.
  • Página 8: Desglose De Piezas

    Desglose de piezas Repuestos Artículo Descripción Número de pieza Cabezal 4-141* de ducha Brida y brazo 300S* de la ducha Ensamblaje RTS-063* del mago Cubierta T-19* del domo S-9600TS-PLR-ESC* (S-9602-PLR, Juego de S-9600TS-PLR) chapetón para S-9600-PLR-ESC* la ducha (S-9601-PLR, Suministro de S-9600-PLR) Water Supply agua CALIENTE...
  • Página 9: Instalación

    Instalación Nota: 3) Para instalar la cubierta del 5) Instale el surtidor para la bañera Para instalar el cuerpo de la domo (E) a la válvula gire en (J) a la conexión de la tubería. válvula, vea el manual. sentido de las agujas del reloj. Girar en el sentido de las agujas del reloj para ajustar.
  • Página 10: Funcionamiento

    ■ ■ ■ ■ Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621 ■ ■ ■ ■ Copyright © 2015 Symmons Industries, Inc. www.symmons.com gethelp@symmons.com ZV-3129 REV A 110515...

Este manual también es adecuado para:

Origins s-9600ts-plrOrigins s-9601-plrOrigins s-9602-plr

Tabla de contenido