LUND BELMOR Chop Top Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Driver Side
Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
• The ideal installation temperature is between 65°-110°F (18°-43°C).
Installation Steps
Lower driver side window, and note the prep surface inside the window gutter as indicated.
Scuff the prep surface using the Scotch Brite Pad, then clean using an alcohol pad and allow to dry.
1
Installation Instructions
Chop Top
Passenger Side
Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
outside of
vehicle
prep
surface
NOTE: visors mount on the inside of the window gutter
Scotch Brite
Pad x1
Clean Towel
window
channel
Page 1 of 3
I - Sheet Number BELCT02 Rev.A
Surface Prep Alcohol Pad x2
x2