Nostalgia Electrics Vintage CCP200 Instrucciones Y Recetas página 11

All manuals and user guides at all-guides.com
Assembly of Main Unit
1. Remove Power Cord from underneath Main Unit (A).
2. Place Main Unit (A) onto the top of the Storage Compartment (C).
3. Ensure that the two inserting pins at the bottom of the Main
Unit (A) line up correctly so that Main Unit (A) can be locked
under the beam of the Storage Compartment (C).
4. Remove Kernel Tray from Main Unit (A) and turn right side up. Attach #7 Kernel
Tray Handle with #8 Kernel Tray Screw and correctly place inside Main Unit (A).
Cord Location
Cord is located at the bottom of the Main Unit (A).
9
ON / OFF &
Light Switches
Crank Handle
Stainless Steel Kettle
Kernel Tray