Tru-Test XRP2 Guia De Inicio Rapido

QUICKSTART GUIDE
This quickstart guide contains installation and user instructions for the XRP2 Panel Reader with Large or Small antenna.
Contents
Unpacking the box ................................................. 1
Connecting the panel reader to a power source ...... 2
Getting around ...................................................... 2
Ways to use the panel reader ................................. 3
Installing the panel reader and antenna .................. 3
Connecting to an indicator (optional) ...................... 5
Recording EID tags ................................................. 5
Getting information off ........................................... 6
Modifying the panel reader settings ........................ 6
Troubleshooting ..................................................... 8
Further information ................................................ 9
Compliance .......................................................... 10

Unpacking the box

1
Check that you have all of these items. If anything is missing, contact your supplier.
XRP2 panel reader
(the panel reader)
Mains power adaptor
(differs depending on region)
USB flash drive
Contains Data Link for PC software and
reference information.
Large or Small antenna
(may be supplied separately)
The 5 m extension lead supplied may be
used to connect the antenna to the reader
(optional).
Battery leads
For further information, see the
Antenna User Manual
, available on the USB flash drive
supplied, and from www.tru-test.com
Panel Reader-Serial cable
Connects the panel reader to a Tru-Test
weigh scale indicator (an indicator).
Serial-USB adaptor cable
Together with Panel Reader-Serial cable,
provides connection to a PC.
Mounting bracket
XRP2 Panel Reader and
1