Ocultar thumbs Ver también para EDB:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Enlaces rápidos

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the EDB! Please read the manual thoroughly before bringing this device into service. If the device
was damaged in transit, don't install or use it and contact your dealer.
2. Features
• the EDB can be used as a doorbell, a remote pager or a panic switch
• the EDB has a range of approximately 240ft (= 80m)
• easy installation: no wiring or AC power required
• uses a coded radio signal to prevent the kind of false triggering traditionally caused by other devices
• a button on the remote control makes it easy to select the ringing tone
• meets the highest quality standards in telecommunications
• 16 different bell chimes: ding, ding-dong, Westminster ...
• ideal for your home, the office, workshops, etc.
3. Installation
a) Transmitter (see figure below)
• insert a 12V VR22 / EL12 battery (incl.) and close the cover
• select a ringing tone, choose a suitable mounting location and attach the device to the wall
b) Receiver (see figure below)
• insert three AA-batteries (not incl.)
• install the receiver anywhere you like: the dining room, the study, the bedroom, etc.
• the user can hang the device on the included screw.
EDB
EDB – WIRELESS REMOTE DOOR CHIME
transmitter
zender
émetteur
emisor
receiver (chime)
ontvanger (bel)
récepteur (sonnette)
receptor (timbre)
1
PEREL
Tabla de contenido
loading

Resumen de contenidos para Perel Tools EDB

  • Página 7: Instalación

    4. Funcionamiento Pulse el botón del emisor para activar el timbre. Lleve el EDB consigo si lo utiliza como botón de pánico o pager. La persona que lleva el emisor consigo sólo debe pulsar el botón del emisor para llamarle. No olvide que debe quedarse a una distancia máxima de 80m del emisor.
  • Página 8: Mantenimiento

    • Utilice y guarde el timbre sólo bajo condiciones normales de temperatura. Las temperaturas extremas, podrían acortar la vida útil o dañar las baterías. • Manipule el EDB con mucho cuidado. Las caídas y los golpes podrían dañar sus circuitos impresos u otras partes.

Tabla de contenido