Uline H-2549 Solución De Problemas

H-2549
SANITAIRE
®
UPRIGHT VACUUM
OPERATING ISSUE
Belts continue to break.
If there is little or no suction.
Vacuum turns off while in use.
Vacuum has a burning smell.
PAGE 1 OF 3
1-800-295-5510
uline.com
TROUBLESHOOTING
1. The agitator bar should be positioned so the belt
lines up with the grooves on the bottom frame of the
vacuum.
1. Inspect brush roller and opening under vacuum for
clogs and debris and clear if necessary.
1. The machine may turn off due to overheating.
2. Check to make sure nothing is caught on the brush
roll and check for clogs.
1. The belt may be damaged or something may be
caught in the brush roll.
2. Check brush roll for obstruction.
3. Replace belt.
Para Español, vea página 2.
Pour le français, consulter la page 3.
RECOMMENDATIONS
(See Instructions)
0321 TH-2549