Pre-Installation Instructions; Connection Options - Dometic Group Waeco Wps900F Manual Del Usuario

Pre-installation instructions

4 Pre-installation instructions
4.1

Connection options

MagicWatch WPS900F and MagicWatch WPS910 can process either digital
speed signals from the CAN bus (CAN bus connection on the loudspeaker)
or an analogue speed signal (analogue connection on the front control elec-
tronics) to activate the front parking aid. A CAN bus connection is not possi-
ble in all vehicles with a CAN bus.
I
NOTE for vehicles with CAN bus
 The vehicle-specific product overview on the WAECO home-
page will tell you whether a CAN bus connection is possible
your vehicle.
"http://www.dometic-waeco.de/wps900",
or call us and ask (for the contact information, please see the
back of the instructions).
 If your vehicle features a CAN bus, but the vehicle list states
that a CAN bus connection is not possible, MagicWatch
WPS900F or WPS910 must be connected using a analogue
connector. This will require analogue transmission of the
speed signal.
If the vehicle does not provide a speed signal which is compatible (neither by
CAN bus nor analogue), the front parking aid must be activated and deacti-
vated using the timer function or the switch (see chapter "Setting the system"
on page 36).
30
WPS900F/WPS910
EN