Descargar Imprimir esta página
Ocultar thumbs Ver también para 803840 94903-0:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 2

Enlaces rápidos

Manuel d' instruction
Thank you for choosing Richell's Product. Please read this instruction manual carefully before using this product, and keep
for future reference. If you give this product to someone else, please also give this instruction manual to the new owner.
Please note some parts of the figures shown below may be slightly different from the actual product, for your better
understanding of the structure and proper use of the product.
1. Applicable Model
Designed to extend Richell's Pet Gate 803840 94903-0 to fit openings up to 41.3" wide.
2. Parts
Before assembling this product, make sure all the following parts are included:
3. Installation
Richell's Pet Gate 803840 94903-0 is assembled using an Option Frame Set to fit openings from 37.2" to 41.3" wide.
Make sure to keep unused parts out of reach of children.
Cautions!
lOnly one Option Frame can be attached to each side.
l41.3" is the maximum opening to fit for a Pet Gate extended by this product.
Type A
Adjuster Knob
Adjuster Bolt
Joint Bolt
Option Frame
l For an opening width of
37.2 - 38.6"
Type A
Required Parts
: (1)
Body
Adjuster Bolt : (4)
Adjuster Knob : (4)
: (4)
Joint Bolt
Option Frame : (2)
Type A
4. Instruction for Proper Use
After assembly, follow the instruction manual of Richell's Pet Gate 803840 94903-0 for proper use.
5. Specifications
UPC/JAN
803840 94348-9 / 4973655 98798-8
Dimension
4.3"W x 0.8"D x 34.6"H
Material
Frame ・ Joint Bolt : Steel (Polyester coating)  Adjuster Cap : Polypropylene
lPlease note that product specifications and design may change without prior notice for the purpose of quality improvement.
lIf you find something wrong with this product, please let us know. Thank you!
Replacement parts may be purchased by contacting Richell USA directly at the
number listed below or at www.richellusa.com.
Instruction Manual Manual de instrucciones
取 扱 説明 書
Type B
Adjuster Knob
Joint Bolt
Option Frame
l For an opening width of
Type A
Type A
Body
Adjuster Bolt : (4)
Adjuster Knob : (4)
Side Frame
Hexagon Nut : (4)
Joint Bolt
Option Frame : (2)
Type A
Type A
Hexagon Nut
Adjuster Bolt
Side Frame
38.6 - 40"
Type B
Required Parts
: (1)
: (1)
: (4)
Type B
1
취급설명서
Option Frame (1)
l For an opening width of
40 - 41.3"
Type B
Required Parts
Body
: (1)
Adjuster Bolt : (4)
Adjuster Knob : (4)
Side Frame
: (2)
Hexagon Nut : (8)
: (4)
Joint Bolt
Option Frame : (2)
Type B
For USA Customers
Designed by:
Richell Corporation, Japan
Distributed by:
Richell USA, Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795
www.richellusa.com
Visit us at
MADE IN VIETNAM
UPC
94348
JAN
98798
Joint Bolt (2)
Type B
Type B
Fax (972) 641-8495

Publicidad

loading

Resumen de contenidos para Richell 803840 94903-0

  • Página 2: Especificaciones

    Gracias por elegir la producto de Richell. Por favor, lea este manual de instrucciones cuidadosamente antes de usar este producto, y consérvelo para consultas en el futuro. Si entrega este producto a otra persona, dele también este manual de instrucciones. Para su mejor comprensión de la estructura y el uso correcto del producto, tenga en cuenta que algunas partes de las figuras que se...