Tripp-Lite B122-000 El Manual Del Propietario

HDMI In-Line Signal Booster/Extender
Package Contents
• B122-000 HDMI Active Extender
• Owner's Manual
Installation
Notes:
• Test to make sure the entire installation works properly before pulling
cables through ceilings/walls.
• Most installations will not require power. However, a Micro USB port is
provided in the event power is needed. If an image does not appear after
performing the following steps, connect a Micro USB cable from the port on
the unit to a USB computer, monitor or USB wall charger port, such
as Tripp Lite's U280-002-W12.
1 Connect the longer HDMI cable between the source and
the connector on the B122-000 labeled "Source."
Note: For extension distances over 75 ft. (23 m), use 24 AWG
HDMI cable such as Tripp Lite's P568-100-HD.
2
Connect the shorter HDMI cable between the monitor
and the connector on the B122-000 labeled "Display."
Note: The HDMI cable connecting the monitor to the
B122-000 must be no longer than 16 ft. (5 m).
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
Owner's Manual
Model: B122-000
Español 3 • Français 5 • Русский 7
Product Features
• Extends a 1080p (@ 24 Hz) signal up to 125 ft. (38 m) from source to extension cable
• No software or drivers required
• External power not required in most installations
• HDCP compliant
• Supports DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio
PROTECT YOUR INVESTMENT!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
MONITOR B122-000
1
BLU-RAY PLAYER
1080p (24 Hz)