Siemens SITRANS F HART Guia De Inicio Rapido

SITRANS F
Add-on module type HART/HART I
SITRANS F HART/HART I
Quick Start
Before installing, including in hazardous areas, refer to the Operating Instructions on the internet or on the SITRANS F
documentation CD-ROM which is included in the product package. They contain detailed safety regulations, information and
specifications which must be observed when installing. Documentation and approvals can be found on the internet:
Flow documentation (http://www.siemens.com/flowdocumentation)
CAUTION
Proper handling
Correct, reliable operation of the device requires proper transport, storage, positioning and assembly. The device must be
carefully operated and maintained. Only qualified personnel should install or operate this device.
Items supplied
Note
The matched paired transmitter and sensor shall be mounted together. Please check in the installation that the system
nameplates of transmitter and sensor will have the same system serial number. (See marked nameplates in the figure.)
Safety notes
WARNING
NOT allowed for use in hazardous areas!
Equipment used in hazardous areas must be Ex-approved and marked accordingly!
This device is NOT approved for use in hazardous areas!
WARNING
Potential hazard
This device can contain lithium batteries.
Lithium batteries may present a potential hazard if they are abused electrically or mechanically.
Safety note for bronze sensors
NOTICE
Potential hazard
Do NOT unscrew bronze sensor transducers during operation!
© Siemens AG 2010 - 2013. All rights reserved
A5E01674032-005, 05/2013
1