Cooper PORTFOLIO ADP140649 Instrucciones De Instalación

697916 ADP140649
Installation Instructions – Pendant Mounted Fixture
Instructions d'installation – Luminaire suspendu
Instrucciones de instalación de la luminaria para montaje
suspendido
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
INSTALLATION
1. Assemble lamp mounting assembly and housing
through keyhole slots using 2 hex screws.
2. Connect 3 jumper wires and 3 fixture wires using
wire nuts provided.
3. Assemble mounting strap to outlet box screws.
4. Assemble stem, adapter plate, nut and lock washer
as shown. Slide canopy down stem. Fasten ball with
2 set screws (Allen wrench provided).
5. Adjust lamp mounting lamp position per housing
instruction sheet.
6. Slide jumper wire through stem and assemble
housing assembly to canopy assembly using 2 hex
nuts.
7 . Connect supply and jumper wires, slide ball end
through mounting strap slot and mount canopy to
mounting stem with 2 screws.
NNote: 36" Long stem can be shortened if required.
Brand Logo
reversed out of
black
Mounting
Strap
Canopy
Canopy Mounting
Screw (2)
Stem (36")
Adapter Plate
Wire
Nut (3)
Lock Nut
Hex Nut (2)
TM
INS # INS # INS #
Jumper Wires (3)
Existing
Outlet Box
Screws
Ball
Set Screw
(2 Wrench Provided)
Lockwasher
Lamp Mounting
Assembly
Housing
Hex Screws (2)