Stryker TPIV Instrucciones De Montaje

TPIV CLAMP & BRACKET STAND ASSEMBLY INSTRUCTIONS
Item
1 Clamp & Bracket
2 Screws, 8-32 x 7/8 FH
Max Height Label
3
4 Carton
Instruction Sheet
5
CAUTION
Do not install TPIV above maximum height (36in or 91.4cm)
PROCEDURE
1. Secure bracket to IV pole with clamp, with the post.
Position T/Pump ® between the posts on the bracket. T/Pump ® can be permanently affixed to the bracket with
2.
the included screw.
CLEANING
The TPIV stand can be cleaned with a damp cloth and mild detergent.
WARRANTY
Stryker equipment and products are warranted against defects in material and workmanship under normal use, and
operation from the date of purchase, for the time periods listed below for the respective equipment and products.
Except for such warranty, Stryker disclaims all other expressed and/or implied warranties including, but not limited to,
the implied warranties of merchantability and of fitness for a particular purpose.
All labor performed and parts provided free of charge for a period of one (1) full year from the date of purchase,
provided the equipment is returned with prior authorization prepaid to Stryker Industries.
www.stryker.com
PARTS LIST
Description Qty
1
2
1
1
1
101183 REV B.1
3
1
2
English
MAX.
1