Uline H-1096 Guia De Inicio Rapido

H-1096, H-1097
π
H-1098, H-1099
DELUXE
COUNTING SCALE
UNPACKING
1. Unpack and verify the following components have
been included:
• Scale unit
• Instruction manual
• Weighing pan
• Power adapter
• Allen wrench
• Four head cap screws
2. Save the packaging material. This packaging ensures
the ideal protection for the storage or transport of the
product.
LEVELING
1. Retract the right rear foot (A) completely into the
scale. (See Figure 1)
B
PAGE 1 OF 15
1-800-295-5510
uline.com
INSTALLATION
2. Adjust the two front feet (A) until the leveling bubble (B)
3. Extend the right rear foot until it contacts the mounting
4. Make certain the scale is stable by placing both
ASSEMBLY
1.
Figure 1
A
Pour le français, consulter les pages 11-15.
is centered in the circle. (See Figure 1)
surface. Make certain that all four feet are contacting
the mounting surface.
hands on the scale platform and attempt to rock
the scale. If it moves, adjust the leveling feet until the
scale stands firmly on the mounting surface.
Using the Allen wrench and head cap screws
provided, secure the pan support (C) to the four posts
(D) over the sensor (E). Next, place the weighing pan
(F) over the pan support. (See Figure 2)
C
D
Para Español, vea páginas 6-10.
Figure 2
F
E
0521 IH-1096