TEFAL AQUASPEED Manual Del Usuario

Thank you for choosing to purchase a product from the Tefal range.
Auto-Stop safety warning light
(depending on model)
Spray Button
to moisten linen
Shot of Steam Button
for removing creases
Steam control
for adjusting the flow
of steam
Anti-calc valve
Spray
Soleplate
Warning ! Remove any labels from the soleplate
before heating up the iron (depending on model).
Warning!
Before using your iron with the steam function for the first time, we recommend that
you operate it in a horizontal position for a few moments, away from your linen, i.e.
press the Shot of Steam button a few times.
During the first few uses, a harmless odour and smoke may be given off.
This has no effect on the use of the iron and will disappear quickly.
What water to use ?
Your appliance has been designed to function with untreated tap water. However, it is
necessary to operate the Self-Clean function regularly in order to eliminate hard water
deposits from the steam chamber.
If your water is very hard (check with your local water authority), it is possible to mix
tap water with store-bought distilled or demineralised water in the following
proportions : - 50% tap water, - 50% distilled or demineralised water.
Types of water not to use
Heat concentrates the elements contained in water during evaporation.The types of
water listed below contain organic waste or mineral elements that can cause spitting,
brown staining, or premature wear of the appliance: water from clothes dryers,
scented or softened water, water from refrigerators, batteries or air conditioners,
pure distilled or demineralised water or rain water should not be used in your Tefal
iron.
Please read these instructions carefully
and keep them for future reference.
AQUASPEED
Ergonomic grip
(depending on model)
Thermostat control
for choosing the ironing
temperature
Electric power
cord
Thermostat indicator light
Goes out when the temperature
has been reached.
Integral anti-scale
system
(depending on model)
Water tank filler
hole