Video Devices - Ge Rm24973 Manual De Instrucciones

ProgrammingYourAudio&VideoDevices
Most GE, RCA and ProScan devices will not
require programming. Check to see if your
device responds to the remote before you
begin programming.
1. Manually turn on the device to be pro-
grammed. Find the three digit code for
your device in the code list.
2. Press
SETUP button until the
INDICATOR
lights, then release the
SETUP button.
3. Press and release the
device
INDICATOR
will blink then remain
lit.
4. Enter the code using the
Number Buttons. After
your code is entered, the
INDICATOR LIGHT will
turn off. If the code is not
valid, the INDICATOR
LIGHT will blink. Check
the code list and repeat
process.
5. Aim the remote at your
device and press the
ON•OFF button. Your
device should turn off.
6. With
on,
(CHANNEL UP). If the
TV responds, no fur-
ther programming is
required.
NOTE: If your device does not respond,
try all the codes for your brand. If the
codes do not work, or your brand is not
listed, try the Code
Search method on
Page 7.
7. Enter your device
code here for easy
reference.
TV CODE LIST
and hold
button.
your
press
the
LIGHT
The
LIGHT
device
CH+
5