Using Your Dual Power™ Pro - Hoover DUAL POWER PRO Manual De Instrucciones

Using your Dual Power
Plug in. Step on the
handle release pedal to
put unit in
1
cleaning position.
NOTE: For best results, use straight, parallel strokes.
Overlap strokes by 1 in. to help prevent streaking.
7
™
Pro:
Step on the power pedal
to turn ON (I=ON). Press
the power pedal again to
2
turn OFF (0=OFF).
Squeeze trigger to apply
cleaning solution. Slowly
push forward then backwards
3
while squeezing the trigger.
Release the trigger and
slowly push forward over
the sprayed area. Then
4
slowly pull back toward
you without squeezing
trigger (dry stroke).
Continue using dry
strokes until little water is
visible passing through
the nozzle.