Adjusting The Cooling Spray - B.A. International BA ULTIMATE POWER+ Instrucciones De Uso

6556042.book Seite 27 Freitag, 15. April 2016 3:13 15
Operating Instructions BA ULTIMATE POWER+
5 Operation
5.3

Adjusting the cooling spray

➢ Adjust the flow rate of the cooling water using the control ring (A) (>
General adjustment > 50 ml/min
A
50 ml/min).
Tip: You can measure the amount of cooling water with a measuring
cup and watch.
Water flow rate
Max. water flow
R/F (Sirona) quick coupling: The maximum water flow is set when the
R/F quick coupling
control ring clicks into place.
KaVo quick coupling: The maximum water flow is set when the two
KaVo quick coupling
markings face each other.
W&H quick coupling: The minimum water flow is set when the red line
W&H quick coupling
and the red dot are facing each other.
Turn the control ring to the left or right for the maximum water flow.
Bien-Air quick coupling: The minimum water flow is set when the control
Bien-Air quick coupling
ring is rotated right to the stop.
The maximum flow is set when the control ring is rotated left to the stop.
27
65 56 042 D3560.201.08.02.02