Celestron 44420 Guía De Inicio

Celestron Microscope Imager – Model # 44420
Information, Specifications, and Instructions
Thank you for purchasing the Celestron Microscope Imager. We hope you will have years of satisfaction with this fantastic
product. You can observe specimen slides or objects magnified through your microscope and capture video or snapshots.
Imager connected to your computer Imager connected to your computer and your microscope
Computer Requirements
Operating System – Microsoft Windows 98/2000/ME/XP/Vista; CD or DVD Drive; USB Port Available
Specifications
Digital Camera – VGA (0.3mp) using a 1/3" CMOS chip (640 x 480 pixels); Video Frame Rate – 30fps
USB2.0 Cable – interface to PC
Magnification – 10x
CD-ROM – for installation of the driver and software (AMCap and Ulead)
Size – 3.6" x 2.4" x 1.5" (92mm x 60mm x 38mm); Weight – 3 oz. (85gr.)
Warranty – Two year limited
CE/FCC/RoHS – compliant; Made in China
Items Included in the box
Microscope Imager, USB Cable, CD-ROM for the driver & software installation, Adapter for Stereo Microscopes
Uses
This imager can be used with virtually any type of microscope (biological, dissecting, or stereo). You can observe or image
(video or snapshot) at whatever the microscope power is set to (see instructions later in this manual).
Below is an example of what type of snapshot imaging you can do with a specimen slide of a cross section of part of an animal
intestine. From left to right – at 40x, at 100x, and at 400x.
1