Function Settings - Selecta TEMPLOW YC Manual Instrucciones

6.2 Function settings
C. Turn on the power, the product enter into the working state.
D. User parameter settings:
Unlock: In the normal running state, press the key
the digital tube will display the parameter code "000", and input the password "005" (enter the user
menu password, enter "099" to restore the key lock password to the default "005"), unlock at this
time. Press the key
"PS1" and enters the setting adjustment.
Use the up or down key to scroll through the parameters. The display order is
b1‐b2‐Set1‐H01‐L01‐Set2‐H02‐L02‐n‐y‐r‐S‐F‐Pt‐tH1‐P1‐PS1.
Press the mute key to confirm the category. The first parameter name of this type of parameter will
be displayed.
6 Press up or down to scroll through the values
7 Press the mute button to display the corresponding value
8 Press up or down to increase or decrease the value
9 Press the Mute key to temporarily store the modified value of the lock and return to the
display parameter.
10 If you need to modify other parameters, repeat steps 1‐4.
11 Press the mute key for more than 3 seconds to store the modified parameter and return to the
display parameter category.
E. Press the mute button for more than 3 seconds, or if there is no action within 60 seconds, exit the
parameter setting program.
F. Parameter display
Item Menu item
1 B1
2 B2
3 Set 1
4 H01
for 3 seconds after unlock, the digital tube displays the parameter code
Range parameters
V1.0‐9.9
V1.0‐9.9
0.0‐10.0
0.0‐10.0
and for 3 seconds at the same time,
Recommended Note
settings
1.0 Hardware version
1.0 Software version
4.0 Temperature setting in refrigeration
compartment
5.0 High temperature alarm deviation
value setting (High Alarm), when the
internal temperature of freezer >
" Setting temperature + High
temperature alarm deviation value",
the High temperature alarm will be