Loading Envelopes - Canon imageRUNNER ADVANCE C355iF Manual Del Usuario

Loading Envelopes

CAUTION!
• Envelopes can only be loaded in the multi-purpose tray or the standard paper drawer.
• Do not use envelopes that have glue attached to their flaps, as the glue may melt due to the heat and pressure of
the fixing unit.
• Do not print on the reverse side of the envelopes (the side with the glued areas).
• For the paper drawer, load envelopes the front side face up, and for the multi-purpose tray, load them the front side
face down. For the maximum loadable number of envelopes and the loading orientation, see the table below.
Maximum loadable number
Yougatanaga 3
Nagagata 3
Monarch
COM10 No.10
DL
ISO-C5
*ISO-C5:40
Preparation before Loading Envelopes
1
Take five or so pieces of envelopes, fan them well
to eliminate curls, and level the stack flat.
Paper Drawer
50*
Envelope
Paper Drawer
Press the stack along
the four side edges.
Multi-Purpose Tray
Multi-Purpose Tray
2
To prevent the sealing edge of the seal flap from
floating from the body of the envelope, press the
envelope in the four corners and expel the air.
10
13