Matco Tools MT3884 Instrucciones De Operación

RECTIFICADOR ANGULAR PARA SERVICIO PESADO 1.0 HP 4-1/2"
4 ½
RECTIFIEUSE À ANGLE DE GRANDE CAPACITÉ 1.0 CV 4-1/2"
Important Lubrication Instructions
Lubricate angle gear head through
grease fitting using MG62 mini grease
gun every 8 hours of use for maximum
gear life.
Gear Lube
WARNING
RATED RPM OF THE
RPM RPM RPM
ACCESSORY USED MUST
EXCEED THE MAXIMUM
TOOL RPM SHOWN
ALWAYS READ
INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR HEARING
PROTECTION
AVOID PROLONGED
EXPOSURE TO
VIBRATION
1.0 HP ANGLE
GRINDER
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
S P E C I F I C A T I O N S
Max. Free Speed ....................................................... 11,000 RPM
Horse Power ...............................................................................1
Sound Level .......................................................................89 dBA
Air Inlet .......................................................................... 1/4" NPT
Air Hose Size .................................................................... 3/8" ID
Grinding Wheel ...................................................................4-1/2"
Spindle Size ................................................................... 5/8" x 11
Air Pressure ..................................................................... 90 PSIG
Length ................................................................................ 9.41"
Shipping Weight ............................................................ 2.85 LBS.
Air Consumption ..............................................................4.3 CFM
WARNING
Copyright © Professional Tool Products, 2016
MT3884
• Operating Instructions
• Warning Information
• Parts Breakdown
MT3884
All rights reserved