Updates: Device Software; Updating The Software - Virax 271000 Manual De Utilización

USE

Updates: Device software

Updating the software:

The password is required to transmit an update.
In addition, all data recorded must be transferred prior to updating.
> Step 1: Check the version installed
After an update, indicate the version used by the device in the "Configuration" screen under the "Software version"
box.
After updating, the icon indicates that the software version installed on the device corresponds to the version
installed on the PC. Should this not be the case, you are recommended to transmit the update. An icon will indi-
cate this situation
> Step 2: Installation on the PC
When a new version of the software installed is available, you can download this version to your PC using the mana-
gement console.
You can activate the automatic update option (File/Activate the automatic update) which will notify any new updates
at startup.
This option can also be used to automatically update management software if you have the appropriate rights
(Windows transfer with these rights).
70 The content of this document may be modified without prior notice